Question 1

Why won't my Honda Foreman shift gears?

Accepted Answer

Honda Foreman electric shift problems are most commonly caused by a failed angle sensor, low battery voltage, or a worn shift motor. The angle sensor is the most frequent culprit on both the TRX450 and TRX500 platforms — it wears out and sends bad signals to the ECU, causing the ATV to refuse to shift. Our ES Shift Bypass Kit eliminates the angle sensor and ECU from the circuit entirely, providing a permanent fix.

Question 2

What Foreman models does the ES Shift Kit fit?

Accepted Answer

We offer three Foreman ES Shift Kits: (1) Foreman 450 TRX450ES/FE 1998–2004 at $69, (2) Foreman 500 TRX500FE/TE/FPE 2005–2006 at $89, and (3) Foreman 500 TRX500FE/TE/FPE 2007–2011 at $119. The 450 and 500 use different shift mechanisms — make sure you select the correct kit for your model. All include free US shipping.

Question 3

What is a Honda Foreman ES Shift Bypass Kit?

Accepted Answer

A plug-and-play electrical kit that replaces the factory electric shift system on the Honda Foreman 450 and 500. It bypasses the angle sensor, ECU, and computer shift logic using a sealed relay circuit. Installs in under 30 minutes with no cutting, splicing, or special tools required.

Question 4

What is the difference between the Foreman 450 and Foreman 500 ES Shift Kit?

Accepted Answer

The TRX450 (1998–2004) and TRX500 (2005–2011) Foreman use different shift shaft geometries and wiring layouts, so the kits are not interchangeable. The 450 kit is $69. The 500 kits are year-split into 2005–2006 ($89) and 2007–2011 ($119) due to a mid-cycle change Honda made to the 500 shift mechanism. Always match the kit to your exact model and year.

Question 5

How do I know if my Foreman's angle sensor is bad?

Accepted Answer

Common signs of a failed angle sensor on a Honda Foreman include: the ATV won't shift up or down, a blinking error code on the shift display, intermittent shifting, or the ATV starts in gear but won't change gears. You can test the sensor with a multimeter, but the most reliable and permanent fix is bypassing it entirely with our ES Shift Kit.

Question 6

How long does it take to install the Foreman ES Shift Kit?

Accepted Answer

Most riders complete the install in under 30 minutes. No special tools required. The kit uses plug-and-play connectors matched to the Foreman's factory wiring — no cutting or splicing needed.

Question 7

What warranty is included with the Foreman ES Shift Kit?

Accepted Answer

All Foreman ES Shift Kits include a 2-year full replacement warranty. If your kit fails within two years, we replace it at no cost.

Foreman ES Shift Kit

Select Your Kit

The Last Fix Your Foreman Will Ever Need.