Honda Rancher 350 es shift bypass conversion kit for foreman electric shift problems?@hondaesshiftkit #hondaesshiftkit

Installation Guide Rancher 350

Install Honda Rancher 350 ES Shift Bypass Kit

Honda Rancher 350 es shift bypass installation

Installation Guide Rancher 350 es shift kit.

Important Note. YOU MUST REMOVE the connector from the frame clip to unplug the two large connectors. It has a safety lock.

Click for video of connector removal.

Honda ES Shift Bypass Rancher plug connector location
Locate left handlebar UP/Down switch connector it’s a large green 10 wire connector plug located under front fender at front of frame rail between the two upper shock mounts.
Honda Rancher 350 left handlebar switch connector plug
Its a Big Green Connector YOU MUST REMOVE the connector from the frame clip to unplug the two large connectors.
https://hondaesshiftkit.com/ Honda ES Shift Kit angle sensor bypass kit rancher ecu bypass wire harness kit for honda atv electric shift problems convert electric shift to manual conversion #hondaesshiftkit hondaesshiftkit.com
Connect the 2 shift kit large grey matching plugs inline with it. YOU MUST REMOVE the connector from the frame clip to unplug it ! They can be very difficult to unplug clean all dirt away from retainer clip and sealing edges always pull on the plug not the wires.
Honda Foreman Rancher ES Shift Bypass Kit Left handlebar switch connector
Connect the plugs inline with the GREEN connector.
https://hondaesshiftkit.com/ Honda ES Shift Kit angle sensor bypass kit rancher ecu bypass wire harness kit for honda atv electric shift problems convert electric shift to manual conversion #hondaesshiftkit hondaesshiftkit.com
Plug in your shift motor plug to the matching round 2 wire connector on the shift kit connector is located on the lower right frame rail and it does not have to be removed from frame to unplug it.
https://hondaesshiftkit.com/ Honda ES Shift Kit angle sensor bypass kit rancher ecu bypass wire harness kit for honda atv electric shift problems convert electric shift to manual conversion #hondaesshiftkit hondaesshiftkit.com
Mount relays on upper right hand framerail. Next connect the round 2 wire plug on the kit to your shift motor matching connector on right side frame rail near fan motor.
https://hondaesshiftkit.com/ Honda ES Shift Kit angle sensor bypass kit rancher ecu bypass wire harness kit for honda atv electric shift problems convert electric shift to manual conversion #hondaesshiftkit hondaesshiftkit.com
Route the harness on the upper right frame rail securing any loose or extra wiring. Route under air box tab mount to prevent pinching wires putting on the seat. Then connect negative black and positive red leads to your battery. Secure all wiring and relays to the frame or main wire harness keeping it away from hot or moving parts.

Its a Big Green Connector YOU MUST REMOVE the connector from the frame clip to unplug the two large connectors.

Visit our Youtube Channel https://www.youtube.com/@hondaesshiftkit

After installation a clutch adjustment may be necessary to obtain smoother shifts. This should be done periodically for routine maintenance. How to adjust your clutch on youtube@hondaesshiftkit